Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Highland Park
A new gate in Highland Park typically runs $1,400 to $6,800 installed, depending on the gate type, motor, and whether we’re replacing old posts or setting new ones. Most installations on flat lots take one full day; hillside jobs with uneven grade or shared driveways usually run two. We work on N. Avenue 57, Elderwood, Piedmont, and every steep street in between, and we quote the full price before any work begins. Call us at (747) 277-8422 and a live person answers, day or night.
Why Ironworks Gate Co. Is Highland Park’s Preferred Gate Installation Company
Highland Park homes are not like homes in other parts of Los Angeles. Most were built between 1910 and 1940, and their gates, posts, and footings have been sitting in the same soil for nearly a century. When we install a gate here, we’re rarely working with a blank slate. We’re working around a driveway that slopes toward the house, a property line shared with a neighbor, or a 40-year-old post that shifted in its footing years ago. That’s normal for us. Our crews have been doing full Gate Installation jobs on these blocks long enough that we spec heavy-duty adjustable hinges on hillside lots by default, because we know what happens to standard hardware when the weight sits on the downhill post day after day.
Victor Salinas, who leads our crews, has walked enough Highland Park driveways to read a gate problem before he touches it. A sagging hinge post on a slope, a latch that won’t catch after a Santa Ana event, a manual wooden gate that fights the grade every time you push it open. These are not mysteries to us. They’re Monday. Every job is protected by our written 90-Day Done Right Promise: if it’s not right, we come back and make it right. No paperwork, no arguing.
When you call, you get a live person, 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback queue. We’ll get a background-checked, uniformed technician to your home when we say we will, and the price we quote is the price you pay. We settle it before a single bolt is turned.
Our Gate Installation Services in Highland Park
Driveway Gate Installation
A driveway gate in Highland Park has to do two jobs: hold the line at the street and survive the grade. On sloped lots off N. Avenue 57 or Elderwood, a single swing gate can put enormous stress on the hinge post throughout its service life. We set posts in deeper footings than the minimum spec and use adjustable hinges so the gate can be trued up as the property settles. Highland Park driveways often serve multiple cars, so we size the operator for daily use, not occasional use.
Pedestrian Gate Installation
Pedestrian gates in this neighborhood are usually older wooden gates on Craftsman and Spanish Colonial Revival homes. The posts are often original, sitting in concrete that has cracked and shifted over decades. We replace the post when it’s no longer sound, set the new one properly, and hang a gate that opens and latches without shoulder pressure. If you want a keypad or an electric strike, we handle that in the same visit.
Sliding Gate Installation
Sliding gates are the right call for many Highland Park properties, especially shared driveways where a swing gate would block the neighbor’s access or simply can’t clear the slope. The catch with a slide gate on uneven ground is the track. If the rack and pinion aren’t shimmed correctly, the gate binds and the motor burns out early. We’ve installed enough slide gates on hilly streets to level the track on the first pass, not the third.
Swing Gate Installation
Swing gates look right on Highland Park’s older homes, but on a pronounced slope they need attention that flat-lot installs don’t. We position the hinges so the gate carries its weight without pulling the post out of the ground, and we spec operators with enough rated power to push the gate uphill against a headwind. Double swing gates on wide driveways are common here, and we install them with synchronized openers so both leaves move together.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
We install and service gate automation from DoorKing, Linear, Ghost Controls, Viking, and several others. The brand on the motor matters less than how it is installed, but it matters that we stock parts for all of them locally. If your Highland Park job needs a specific control board or a replacement operator arm, we’re not waiting on a distributor in another state. Most jobs are completed in a single visit, with the price settled upfront and in writing.
Common Gate Installation Problems We See in Highland Park Homes
- Downhill hinge posts pulling out of aging concrete. On steep streets, the downhill post carries more weight than the uphill post, and fifty-year-old footings weren’t poured for that load. The fix is a new post, a deeper footing, and hardware that can be adjusted as the ground settles.
- Gate operator sensors knocked out of alignment after Santa Ana winds. When wind slams a gate past its stop, the entrapment sensors shift and the gate refuses to close or reverses mid-cycle. We realign and reinforce the stops so it doesn’t recur with the next wind event.
- Shared driveway slide gates jamming on uneven grade. A track that is not shimmed level on a sloped lot will bind the gate within months. We cut the track into the grade so the gate rolls true from day one.
- Manual wooden gates from the 1940s that no longer clear the ground. Original posts lean, the gate droops, and the bottom corner scrapes the driveway or catches on the lip of the concrete. We either reset the posts and rehang the gate, or replace it entirely if the wood has rot from Arroyo Seco moisture.
Pricing for Gate Installation in Highland Park, CA
Here is what honest pricing looks like for Highland Park. A standard single swing driveway gate, installed with a basic operator, runs $1,400 to $3,200. A sliding gate on a steel track with automation sits between $2,800 and $6,000, depending on gate length and whether we’re cutting into grade. Pedestrian gates are $600 to $1,800 with new posts where needed. Double driveway gates with synchronized openers start around $3,500 and go up from there. Hillside work adds labor because footings have to be deeper and the track has to be dead level. We quote the full price before work starts, and that’s the price on the bill. Call (747) 277-8422 for a free estimate. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Highland Park
Our crews work across the northeast LA area. That includes Alhambra, Pasadena, Altadena, and Monterey Park. If you’re just over the city line, we’ll still come measure and quote the job the same week. The 90-Day Done Right Promise and upfront pricing apply everywhere we work, not just in Highland Park.
Serving Highland Park, CA - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Highland Park
The sag comes from the downhill post carrying more than half the gate’s weight, often set in concrete that was poured decades ago for a lighter, smaller gate. As the ground settles and shifts along the Arroyo Seco corridor, that post leans a little further every year. The fix is a new post set in a deeper footing, heavy-duty adjustable hinges, and proper weight distribution across the gate frame. Call (747) 277-8422 and we’ll come look at your specific gate.
Usually yes, provided the posts are sound and the gate itself is square. On slopes we install an operator with enough rated capacity to push the gate uphill, and we reinforce the hinge hardware so the added motor torque doesn’t finish off an already weak post. If your posts are shot, we replace them before hanging the automation.
A sliding gate is almost always the right answer for a shared driveway, because it doesn’t swing into a neighbor’s space and it handles a slope better than a double swing setup. We installed a slide gate on a shared driveway off N. Avenue 57 where a swing gate couldn’t clear the grade. Our crew set a new steel hinge post in a deep footing and used a Ghost Controls solar gate opener with a loop detector for inbound traffic, keeping vehicle access open while we worked.
Most automatic driveway gates benefit from a loop detector, which senses a vehicle in the path and holds the gate open rather than letting it close on the car. On steep driveways it matters even more, because a car waiting at the crest of the slope might not be visible to a photo eye. We install loop detectors as standard on automated driveway gates where the driveway pitch makes reversing space tight.
Highland Park sits in the path of Santa Ana wind events that funnel through the Arroyo Seco, and those gusts hit gates with enough force to slam them past their stops. That’s brutal on hinges, latches, and operator arms. We install heavy-duty stops and adjusted closing force so the gate doesn’t build up destructive momentum. If the wind has already thrown your sensors out of alignment, we’ll fix that in the same visit.
Call Ironworks Gate Co. for Gate Installation in Highland Park
If you live in Highland Park and you’re tired of wrestling a gate that sags, binds, or won’t close, we’d like to hear from you. We’ll come out, look at your driveway, measure it, and hand you a written price. Then we’ll do the job right and stand behind it in writing. Call (747) 277-8422 for a free estimate. A live person answers, 24 hours a day. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park and the surrounding northeast LA area.