Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Alhambra Homeowners
A new gate in Alhambra typically costs between $2,800 and $9,500 installed, depending on the size, material, and whether automation is included. Most installations we schedule are completed in one to three days after the gate is fabricated, and every job is protected by our written 90-Day Done Right Promise. If you’re calling from Alhambra or anywhere nearby, a live person answers at (747) 277-8422 and will walk you through what to expect before anyone steps foot on your property.
Victor Salinas founded Ironworks Gate Co. in 1984, and in the 42 years since, we’ve hung thousands of gates across the San Gabriel Valley. Our technicians are background-checked and uniformed, and they approach every Alhambra driveway the way they’d approach their own mother’s. If the gate isn’t right, we come back and make it right. That’s not a slogan. It’s the Keystone Standard, and it has been since our first year.
Key Takeaways
- Full gate installations in Alhambra run $2,800 to $9,500 installed, with automation adding $1,200 to $2,800.
- We quote the price before any work starts. No surprises on the bill, ever.
- Ironworks Gate Co. has served Alhambra since 1984 under the same ownership, led by Victor Salinas.
- Every job carries a written 90-Day Done Right Promise.
- A live person answers 24/7 at (747) 277-8422. Not an answering service.
What Our Gate Installation Service Includes
Every installation starts with the same conversation: what do you need the gate to do? Keep pets in? Keep solicitors out? Close automatically when you pull out onto the street? We listen first, then we build. Here’s what our Alhambra Gate Installation team handles, day in and day out.
Driveway Gate
A driveway gate is the first thing you build when you want to stop foot traffic from wandering onto your property. In Alhambra, where many homes sit on tree-lined streets with open frontages, a driveway gate restores a clear line between public sidewalk and private home. We build driveway gates in steel, aluminum, and wrought iron, configured as swing or slide, manual or automated, and we size the posts to the gate’s weight so it doesn’t sag six months after we leave.
Pedestrian Gate
A pedestrian gate handles foot traffic separate from vehicles, and it’s usually the gate you’ll use most. Whether it’s a garden entry, a side-yard access point, or a companion to a driveway gate, we build it to match the home’s architecture and the width of the walkway it serves. Pedestrian gates run $900 to $3,200 in Alhambra depending on materials and hardware. Every one we install gets a magnetic catch and a deadbolt-ready latch, because a gate that doesn’t stay closed isn’t a gate.
Sliding Gate
Sliding gates are the answer when your Alhambra driveway slopes up from the street, or when you don’t have room for a gate to swing outward into traffic. The gate rides on a track or a cantilever system, which means it’s less affected by a driveway that isn’t perfectly level. We see a lot of sliding gate installs on the hillside streets above Alhambra, where property is tight and the slope is real. We spec the roller hardware by gate weight and use adjustable steel trucks so the gate stays square year after year.
Swing Gate
A swing gate is the classic choice for level driveways and wide openings, and it’s usually the most economical to install. In Alhambra’s flat neighborhoods, swing gates open inward or outward depending on setback and sidewalk clearance. We set the posts in concrete at the right depth, build the gate to the opening’s exact width, and hang it on greasable ball-bearing hinges so it moves smoothly from day one. A typical single swing gate runs $2,800 to $5,500 installed.
Double Gate
A double gate is two leaves meeting in the middle, used when the driveway opening is too wide for a single gate to be practical. In Alhambra, double gates often serve driveways over twenty feet wide or homes with a second apron for a detached garage. We align the leaves with an adjustable drop rod and a sealed center catch, and we weld the frames square so the two halves meet cleanly. A double gate costs more than one single, but in many cases it’s the only configuration that works without major driveway surgery.
Security Gate
A security gate is a gate designed to be a barrier first and an aesthetic element second. In Alhambra, that usually means heavy-gauge steel frames, welded pickets instead of bolted, a tamper-resistant locking system, and an operator rated for the gate’s full weight. We build security gates for side yards, rear alleys, and driveway perimeters where the goal is clear: if it takes a tool to get through it, it’s doing the job. We’ll discuss your specific concern, whether it’s package theft, solicitors, or an open alley behind the house, and build to that concern, not to a catalog spec.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
Automation is where gate installation goes from “nice to have” to “daily use.” We’re trained and equipped on nine major gate-automation brands, including DoorKing, LiftMaster, and FAAC. That means when we hang a new driveway gate in Alhambra and you want it to open from the car, we install the operator ourselves, correctly, on the first visit. We stock OEM parts for DoorKing and LiftMaster operators, so when we install one, we’re not guessing at what it needs.
We also work regularly with Linear and Viking systems, and we’re comfortable with Ghost Controls units on lighter aluminum gates where a solar operator makes sense. Whatever opener is on your property now, we’ll assess it during the free estimate and tell you straight whether it can be reused with the new gate or whether you’d be better off starting fresh. Nobody comes back to you at the end of the job and says “oh, by the way, the motor does not work with the gate we just built.” That conversation happens before the first bolt goes in.
Signs You Need Gate Installation Right Now
- Your current gate leans on its hinges. When a gate drags on the concrete or needs to be lifted to close, the hinges and posts are failing. In Alhambra’s soil, which is often heavy clay, a post that wasn’t set deep enough will shift within a few seasons. A replacement gate starts with a correctly set post, at the right depth for this soil. A gate that leans is not a hinge problem; it’s an installation problem, and patching it doesn’t fix it.
- The gate no longer closes behind you. Whether it’s a tired spring, a bent track, or a frame that’s twisted out of square, a gate that doesn’t self-close is no longer doing its job. You should not have to think about whether the gate closed. When you do, it’s time for a new installation with hardware sized to the gate’s actual weight.
- You’re propping the gate open with a rock or a brick. That’s a gate that has already failed. It’s holding the driveway hostage, and it’s telling anyone who walks by that your property is accessible. A new gate with a proper latch and an automated closer solves that permanently.
- You have a new dog, a new car, or a new kid. Life changes, and a gate that worked for twenty years may not work anymore. A wider opening for a truck, a taller gate for a dog that can jump, a keypad for a teenager walking home from school. These needs are specific and measurable, and they’re exactly the kind of thing a new installation addresses head-on.
- You inherited a gate from a previous owner that was never right. You didn’t buy the house for the gate. The gate came with it, and it’s always been rusty, noisy, or difficult. We replace a lot of those in Alhambra, and we hear the same thing every time: “I wish we had done it years ago.” The gate is part of the home now, and it should work like the rest of the home works.
Our Gate Installation Process - Step by Step
- 1
Free estimate at the property. We come out, walk the driveway with you, measure the opening, check the ground for level and soil type, and look at the existing posts and any electrical runs. We’ll discuss what you want the gate to do and which materials fit your budget and the home’s style. You get a written price before we leave, with a line-item breakdown.
- 2
Design and material selection. We’ll go over choices in steel, aluminum, and wrought iron, plus powder-coat finishes and fastening hardware. We’ll tell you which options hold up in Alhambra’s heat and which hardware we trust for this climate. Once you approve, we order materials and schedule fabrication.
- 3
Fabrication. Most of our gates are welded in-house, not assembled from a kit. Frames are jig-welded square, pickets are welded to the rails, and the whole gate is ground clean before the finish is applied. A gate that’s square when it’s welded stays square when it’s hung.
- 4
Installation day. Our team sets posts in concrete at the correct depth for gate weight and local soil, hangs the gate, sets the hinges, and dials in the latch. If automation is part of the job, we run the power, mount the operator, set the open and close limits, and adjust the obstruction and safety settings. We test the gate through a full open-close cycle, several times.
- 5
Walkthrough and the 90-Day Done Right Promise. We show you how the gate works, what to check seasonally, and we hand you our written guarantee. If anything is not right within 90 days, call us. We come back. No arguing, no paperwork, no exceptions. That is the Keystone Standard.
How Much Does Gate Installation Cost in Alhambra?
A typical Best Gate Installation in Alhambra, CA runs $2,800 to $9,500, with most single driveway gates landing between $3,500 and $6,000. Here is what that looks like by type:
- Pedestrian gate: $900 to $3,200
- Single swing driveway gate: $2,800 to $5,500
- Double swing driveway gate: $4,500 to $8,500
- Sliding driveway gate: $4,000 to $9,500
- Automation added to any gate: $1,200 to $2,800
- Security upgrades (heavier steel, special locks): add $800 to $2,500
What drives the price: gate width and weight, material choice, the condition of the existing posts, whether wiring needs to be run, and what the ground is like where the posts go. In Alhambra, older homes often have concrete driveways that require core drilling rather than simple post-hole digging, which adds to installation labor. A free estimate from Ironworks Gate Co. includes every one of those line items, so you know the full number before you say yes. We charge what we quote. No add-ons at the end, and every estimate is free. If you have another written estimate, bring it and we’ll give you a free second opinion on it, no obligation.
Gate Installation Near Alhambra - Our Service Area
We install gates throughout the West San Gabriel Valley: Monterey Park, San Gabriel, San Marino, Rosemead, and up through South Pasadena and Gate Installation in Pasadena. We also run crews into Gate Installation in Altadena and the foothill communities above the 210. From our Alhambra shop, most appointments are scheduled within a few business days, and a live person answers the phone 24/7 to get you on the calendar. This is our home territory, and we’ve been driving these streets since 1984. For more on what we do, see our home page.
Serving Alhambra, CA - Our Local Coverage Area
We’re based in the Alhambra area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Alhambra
Gate installation is the complete process of setting posts, hanging a fabricated gate, and connecting any automation or locking hardware so that the gate operates correctly on day one. In Alhambra, that means building the gate to the specific driveway opening, anchoring posts to handle the gate’s weight through years of use, and ensuring the gate clears the sidewalk and the street properly. It’s not just assembling a kit; it’s making a permanent structure square, plumb, and reliable. Call (747) 277-8422 to talk through what your property needs.
Most residential gate installations take one to three days on site, after the gate is fabricated. Fabrication typically adds one to two weeks depending on material availability and our production queue. A simple pedestrian gate can sometimes be built and installed within a week; a custom double driveway gate with automation might be three weeks from signed estimate to finished job. We’ll give you a date range at the estimate and keep you informed as the fabrication progresses.
You already saw the numbers above: $2,800 to $9,500 for most projects, with pedestrian gates on the lower end and automated sliding or double gates at the top. The exact figure depends on your driveway’s width, the material, whether we can reuse your existing posts, and whether automation is included. Our free estimate gives you a firm line-item price before any work starts. Call (747) 277-8422 and we’ll schedule that estimate at your convenience.
Yes, we install and service DoorKing and LiftMaster operators, and we stock their OEM parts. If your Alhambra gate is automated or you’re adding automation to a new gate, we’ll assess the operator, the gate’s weight, and the power supply, and we’ll recommend the right unit for the job. We’re also trained on FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. Whatever is on your driveway, we know it.
If your gate has failed and you need Emergency Gate Installation in Alhambra, CA, call us. A live person answers 24 hours a day, 7 days a week, and we’ll tell you honestly how soon we can get a crew to your property. For a broken spring, a snapped hinge, or a gate that won’t close, we can often respond same day or next morning. A full custom installation takes longer, but we’ll secure your property promptly while the new gate is being fabricated.
Every gate installation from Ironworks Gate Co. carries our 90-Day Done Right Promise, in writing. If anything on the install is not right within 90 days, we come back and make it right at no charge. No paperwork, no arguing, no exceptions. Our gates and hardware also carry the manufacturer’s warranty on materials, and we’ll explain exactly what’s covered at the time of installation.
Clear the driveway area on installation day: move any vehicles to the street or the far side of the driveway, and clear landscaping or storage items away from the fence line where the gate and posts will go. If we’re running power for automation, we’ll tell you in advance which areas of the yard or garage we’ll need access to. We handle the rest: permits, if any are required, trenching, concrete, and cleanup. When we leave, the site is clean and the gate works.
Schedule Your Gate Installation Service in Alhambra Today
If you’ve been living with a gate that sticks, sags, or never quite worked, the fix is one phone call away. Ironworks Gate Co. has been installing gates in Alhambra since 1984, and we’d be glad to give you a free, written estimate with a firm price before any work begins. Call (747) 277-8422 today. A live person will answer, any hour, any day, and Victor Salinas and his team will take it from there. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Alhambra since 1984.