Gate Installation in San Marino - Written Price, Install Date Set

Fast, Reliable Gate Installation Across San Marino

Gate installation in San Marino typically runs $4,200-$18,500 depending on whether we’re building a custom double driveway gate in wrought iron or retrofitting a pedestrian gate with new automation. Most jobs are quoted on-site, in writing, before any work begins, and scheduled within five to ten business days. If you live off Huntington Drive, St. Albans Road, or anywhere in the estate neighborhoods south of Lacy Park, call (747) 277-8422 and a live person will answer. We know this city’s gates better than anyone because we’ve handled Gate Repair - San Marino, rebuilding, and installation for hundreds of them over four decades.

Call (747) 277-8422

What makes San Marino different is the ironwork itself. These aren’t the aluminum driveway gates you see in newer tracts. They’re original 1930s-1950s wrought iron, hung on brick or stone pillars that have settled since the Eisenhower administration. The posts shift, the hinges bind, and suddenly a gate that closed perfectly for 60 years drags across the driveway. Our Gate Installation team handles the full scope: new custom gates, complete automation packages, and the masonry repair that older San Marino properties almost always need at the same time.

We schedule free estimates at your convenience. The price you’re quoted is the price you pay, no exceptions. If it’s not right after we leave, our 90-Day Done Right Promise puts it in writing that we’ll come back and make it right. No paperwork, no arguing.

Why Ironworks Gate Co. Is San Marino’s Preferred Gate Installation Company

Ironworks Gate Co. has been in business since 1984. Led by Victor Salinas, our crews work almost exclusively in older estate neighborhoods like San Marino, where the gate isn’t a weekend project from a big-box store. It’s a piece of the home’s architecture, and the homeowners here treat it accordingly.

San Marino customers call us for San Marino Gate Access Control because we show up when we say, we quote the job before we start, and our technicians treat your driveway like their own mother’s. They’re background-checked, uniformed, and trained on nine gate-automation brands, including Linear, Viking, Ghost Controls, and DoorKing. If your 1980s operator finally gave out and you want modern smartphone control without tearing out the original iron, we can do it.

We serve all of San Marino, from the estates near The Huntington Library to the streets off Los Robles Avenue and around Valentine Elementary. Our scheduling is coordinated from the Los Angeles office, but the technicians who come to your home are local and know San Marino’s gate inventory firsthand. The city’s strict appearance codes mean we’re often matching new hardware to old iron rather than swapping in something off the shelf. That’s the work we do best.

Our Gate Installation Services in San Marino

Every installation begins with a site visit. We look at the existing pillars, measure the opening, check how the ground has shifted, and then give you a written price. Here’s what we install most often in San Marino:

Driveway Gate

A new driveway gate in San Marino is almost never a standalone project. The pillars may need repointing or rebuilding first, because after 70 or 80 years of settling, the post footing that looked fine in 1950 is now a quarter-inch out of plumb. We pour new footings where needed, hang the gate square, and then add the operator. A custom ornamental double driveway gate, built to match your home’s style and finished to handle San Marino’s dry heat cycles, typically runs $8,000-$18,500 including automation.

Pedestrian Gate

Pedestrian gates in San Marino are usually simpler, but they still need to match the driveway gate. Nobody wants a plain aluminum pedestrian gate next to a 1930s wrought-iron driveway gate. We fabricate or source matching ironwork, install new hinge posts when the old ones have rusted at the base, and add a keypad or intercom if you want it. Most pedestrian gate installations run $1,800-$4,500.

Sliding Gate

Sliding gates make sense on San Marino properties where the driveway slopes or where a swing gate would block sidewalk access. The catch here is the track. Santa Ana winds push debris into slide tracks, and if the track wasn’t set dead level, the gate binds at the worst possible moment. We install cantilever and track-roller slide gates, set the track properly the first time, and specify hardware that handles the wind load this city gets every fall. Expect $5,500-$14,000 for a typical San Marino sliding gate with automation.

Swing Gate

Swing gates are the classic San Marino configuration, usually a matched pair meeting in the middle. We hang single and double swing gates, but on older properties, we’re just as often doing Gate Parts & Welding in San Marino: resetting hinge posts, welding cracked top rails, and converting original ironwork to modern automation. A new custom swing gate system runs $4,000-$16,000 depending on size, materials, and whether we’re rebuilding the pillars too. If you only need one leaf replaced, we can match the existing scrollwork so you’d never know which side is new.

Trusted Brands We Service in San Marino

We install and service automation from all nine major brands, but in San Marino we see a lot of Linear, Viking, Ghost Controls, and DoorKing systems, both original and replacement. That matters because a technician who only knows one brand will tell you the operator needs to be replaced when it just needs a board or a limit switch. We stock common parts for these brands and can have others in hand within a day or two. If your existing operator is old enough that parts are scarce, we’ll tell you straight and quote a modern replacement that fits your gate without altering the ironwork.

Common Gate Installation Problems We See in San Marino Homes

• Settled masonry pillars. The single most common issue in San Marino. Decades of soil settlement tilt the pillar just enough that the hinge post goes out of plumb, and the gate sags toward the latch side. No hinge shim fixes it. We rebuild the footing, reset the post, and remount the gate so it closes square.
• Santa Ana wind damage. Every fall, high-gust events bend lightweight swing gates off their stops and snap old welds at the frame joints. A gate that survived 80 years of calm can be knocked out of alignment in one windy weekend. We weld and reinforce those joints rather than tell you to buy a new gate.
• Cracked welds from heat cycling. San Marino’s dry heat makes iron expand and contract repeatedly. Over decades, that stress cracks the original welds along the top rail. Then the first damp morning fog gets into the fracture and rust blooms under the paint. We see this on gates all over the city, especially the double driveway gates on Lacy Park side streets.
• Mismatched replacement panels. City code and neighborhood standards in San Marino effectively prohibit off-the-shelf panels. Matching scrollwork and picket profiles from the 1930s or 1940s means custom fabrication. We mill and weld our own scrollwork in-house, which is why a simple panel swap here takes longer than it would anywhere else in the San Gabriel Valley, and why the result looks original.

Pricing for Gate Installation in San Marino, CA

We Also Serve Cities Near San Marino

Our crews work throughout the San Gabriel Valley. If you’re in San Marino or nearby, we serve San Gabriel, Alhambra, Pasadena, and Temple City with the same certified technicians and written 90-Day Done Right Promise. Same upfront pricing, same live phone answer, whatever gate is on your driveway.

FAQs - Gate Installation in San Marino