Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across San Marino
When a San Marino estate gate starts sagging, binding, or refusing to move, the problem is rarely the panel itself. It’s almost always the hinge post, a cracked weld, or a roller that gave out. Our Gate Parts & Welding team repairs and fabricates ironwork on site across San Marino, and we can typically have a technician to your property same day or next morning. Call (747) 277-8422 and a live person picks up, 24 hours a day. We quote the job before any work begins, then stand behind it with a written 90-Day Done Right Promise.
Why Ironworks Gate Co. Is San Marino’s Preferred Gate Parts & Welding Company
San Marino is not like other San Gabriel Valley cities. The gates here sit on 1920s brick pillars, swing from original iron hinges, and carry scrollwork patterns that haven’t been manufactured in seventy years. A handyman who replaces a hinge without understanding the masonry behind it leaves you with the same sag six months later. That’s why homeowners around Huntington Drive, St. Albans Road, and Lacy Park call us instead.
We’ve been doing this work for over 42 years, and our founder, Victor Salinas, built the company on a simple rule: fix it right enough that the customer never has to call you back. Most gate parts and welding jobs in San Marino are completed in a single visit. Our technicians arrive in uniform, background-checked, and carrying the welding equipment and fabrication tools needed to match period ironwork on the spot. When a job does require a return visit, it’s covered under our 90-Day Done Right Promise. No paperwork, no arguing, no chasing us down.
San Marino homeowners don’t call for the cheapest gate repair. They call because the last contractor left a weld that cracked, or a gate that scrapes the brick, or a motor that hums but won’t move. We get those calls. And we fix what the last guy didn’t.
Our Gate Parts & Welding Services in San Marino
We handle the full scope of gate parts and welding, from a single cracked weld to a complete hinge and post rebuild. Here’s what that looks like in San Marino, where Victorian and Spanish Colonial ironwork dominates the streets.
Hinge Replacement
Original strap hinges on 1930s and 1940s San Marino gates were often forged by hand. When they wear or tear, you can’t order a replacement from a catalog. We fabricate replacement hinges that match the original profile, then weld them in place with the gate properly shimmed so it closes square. On brick pillar homes near the Huntington Library district, we also check the mortar and footing around the hinge plate. A new hinge bolted to a shifting pillar is a hinge that fails again.
Post Replacement
Ever see a San Marino gate that hangs at a five-degree angle while the driveway shows a fresh scrape mark? That’s a settled post. Years of irrigation and clay soil movement under San Marino’s masonry walls shift the original footings. We remove the failed post, pour a new concrete footing with deeper anchoring, and reset the post plumb. Then we re-hang the gate and adjust the latch so it seats clean. This is one of the most common repairs we perform in San Marino, and one of the most frequently misdiagnosed by general contractors.
Rail Repair
Slide gates on estates off San Marino Avenue and Winston Road carry a lot of weight across a long rail, and the rail takes the brunt of every Santa Ana wind event. Bent rail sections make the gate chatter, shudder, and eventually stall. We straighten or replace rail sections, weld new stops, and realign the truck rollers so the gate runs quiet again. If the rail is sound but the gate still jerks, we check the chain tension and sprocket wear before cutting anything.
Custom Welding
This is where San Marino separates from everywhere else. The city’s design review process means you cannot swap a broken scrollwork panel for a modern off-the-shelf piece. It has to match. Our welders fabricate replacement pickets, scroll ends, finials, and gussets to match the original pattern, then rust-treat and finish the repair so it disappears into the gate. In many cases, the repaired section is indistinguishable from the original ironwork within a week of weathering.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Marino
Most San Marino gates now carry an automation system bolted to ironwork that predates World War II. We service the openers on these estate gates, including LiftMaster, DoorKing, Viking, Linear, and FAAC units. Our technicians arrive with on-board parts stock for the most common repairs, which means many San Marino jobs are finished the same day. If your opener is beyond repair but the gate itself is sound, we can install a new operator while keeping the existing ironwork untouched.
Common Gate Parts & Welding Problems We See in San Marino Homes
- Settled masonry pillars: San Marino’s clay-heavy soil shifts over decades, tilting the original brick or stone hinge posts. The gate sags and the top hinge tears, even though the panel itself is straight. Fixing this requires resetting the post footing and re-hanging the gate, not just cranking the hinge bolts.
- Santa Ana damage to slide gates: Fall and winter winds push palm debris into track channels and batter lightweight frames against their stops. We regularly weld cracked slide gate frames and straighten bent track sections on the same visit.
- Hidden weld corrosion: Decades of low humidity and a paint-only rust treatment hide oxidation at the weld points on original iron gates. The first sign is often a picket that snaps off in your hand or a hinge that shears. We cut out the corroded section and weld in a matching patch, then seal it properly.
- Space-constrained repairs on shared driveways: Many San Marino properties share gated rights of way. We’re used to working in these tight conditions, keeping one side of a divided gate operational while rebuilding the other half, so your neighbor’s access is never blocked for a full day.
Pricing for Gate Parts & Welding in San Marino, CA
Here’s what you can expect to pay for common gate parts and welding work in San Marino. These are honest ranges for this market, based on the estate gates and masonry construction we see here every week.
| Service | Typical San Marino Range |
|---|---|
| Hinge replacement (single gate, steel or wrought iron) | $280 - $650 |
| Weld repair on a cracked gate frame or picket | $180 - $450 |
| Post replacement with new concrete footing | $700 - $1,800 |
| Custom scrollwork or picket fabrication (per piece) | $150 - $500 |
| Slide gate rail straightening and re-welding | $320 - $850 |
| Full gate re-hang and adjustment after post reset | $450 - $1,100 |
The final number depends on how much custom work your gate requires, the condition of the surrounding masonry, and access. You’ll have a written quote before we start, and that number does not change unless you add scope. We never hand you a surprise invoice. Call (747) 277-8422 for a free estimate, or ask about our $50 off any repair over $250 and our free second opinion on any written estimate you’ve received from another company.
We Also Serve Cities Near San Marino
Our crews work throughout the western San Gabriel Valley. If your home is just outside San Marino, we regularly run service to San Gabriel, Alhambra, Pasadena, and Temple City. We dispatch and schedule from our Los Angeles office, and our team serves San Marino locally with technicians who know these streets and gates. Call the same number, (747) 277-8422, and we’ll get you on the schedule.
Serving San Marino, CA - Our Local Coverage Area
We’re based in the San Marino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in San Marino
Yes. We fabricate replacement scrollwork, pickets, and gussets to match the original pattern on your gate, then weld them in and finish the repair so it blends with the surrounding iron. This is standard practice for San Marino gates, where the city’s design review standards mean replacement pieces must match what was originally built. We can show you photos of similar repairs on period gates around the city. Call (747) 277-8422 for a free assessment.
In most San Marino cases, the gate panel itself is still straight and salvageable. The problem is the pillar footing. We reset the footing, re-plumb the post, then re-hang the gate on the repaired anchor points. You rarely need a new gate. We’ll tell you during the free estimate exactly what requires fixing and give you a written price before any work starts. Call (747) 277-8422 to schedule.
Yes. We install and repair slide gates on San Marino properties where setback requirements and shared walls leave no room for a swing arc. A slide gate runs on a ground track or cantilever rail, and we handle the full conversion: welding the gate frame, installing the rollers and track, mounting the operator, and wiring safety edges and photocells to meet city code. Call (747) 277-8422 for a free site walk and written quote.
We stage the job so the driveway stays usable. On Lorcan Road, a 1940s Spanish Colonial estate called us for a sagging swing gate that had torn its original weld at the lower hinge post. Our techs cut away the failed weld, fabricated a custom gusset to match the existing ironwork, reset the hinge post footing with new concrete, and installed a pair of LiftMaster gate operators with safety photocells - all while the house’s daily vehicle and pedestrian gate kept working off a temporary slide-gate bypass. We can do the same for your property. Call (747) 277-8422 and we’ll explain exactly how we’d phase the work.
First we clear the debris from the track and inspect the rack teeth for chips or bends. If the rack is damaged, we weld in a replacement section and realign the pinion engagement. If the gate frame bent, we straighten it back to true before re-mounting the rack. Then we test the full travel with the operator under load. Most San Marino rack and pinion repairs are completed the same day. Call (747) 277-8422 for an exact quote - estimates are free.
Call Ironworks Gate Co. for Gate Parts & Welding in San Marino
If your San Marino gate is sagging, dragging, or simply not closing the way it did ten years ago, call us. Victor Salinas and the Ironworks Gate Co. team have been repairing estate gates for over 42 years, and we back every job with a written 90-Day Done Right Promise. You’ll get a live person on the phone at (747) 277-8422, a free estimate, and an upfront price before any work begins. We’re here 24 hours a day, 7 days a week. Not a voicemail. Not an answering service. A real person who knows gates.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving San Marino and the San Gabriel Valley for over 42 years.