Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Temple City
Most Temple City homes were built without driveway gates. The ranch houses that line streets like Cloverly Avenue and Workman Avenue left the factory with open front yards, which means nearly every gate we install here is a retrofit on a 1950s to 1970s slab. That changes the math. A gate hung on an original mid-century driveway needs a post footing that can actually carry the weight, and it needs clearance measurements that account for how those older slabs have settled and cracked over sixty years. We’ve been doing this work long enough to know what Temple City’s houses throw at us before we unload the truck. Call (747) 277-8422 and we’ll walk your property, take measurements, and give you a written price before any work starts.
Why Ironworks Gate Co. Is Temple City’s Preferred Gate Installation Company
We’re a dedicated gate company. That distinction matters in Temple City, where the majority of calls we get involve ornamental iron work and automation retrofits that a general handyman shouldn’t be touching. Victor Salinas leads our crews, and the standard he set is simple: the 400th job gets the same care as the first, whether it’s a new install or Gate Repair - Temple City. Our technicians are background-checked and uniformed, trained across nine gate-automation brands including LiftMaster, Viking, DoorKing, and Ghost Controls, so when we arrive at a Temple City home we already know what’s on the driveway before we open the panel. Every job we finish carries the 90-Day Done Right Promise in writing. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Temple City homeowners tend to stay put. When we install a gate on a street like Kauffman Avenue or near Live Oak Park, we treat the job like we’ll be driving past it for the next twenty years, because we will be. That’s the difference between a company that plans to be in town for another forty years and one that’s chasing the next job.
Our Gate Installation Services in Temple City
Driveway Gate
A driveway gate in Temple City is almost always a retrofit. The original post-WWII ranch home didn’t come with one, so we’re working with a slab poured between 1955 and 1975, and that slab wasn’t poured with a 400-pound ornamental iron gate in mind. We check the existing concrete, we check the post footings, and we tell you honestly whether the foundation can carry what you want. If it can’t, we reinforce it. If it can, we won’t sell you work you don’t need. Driveway gate installations in Temple City typically run $4,800 to $12,500 depending on gate size, material, and whether the footing needs reinforcement.
Swing Gate
Swing gates are the most common style we hang in Temple City, because they fit the wide, shallow front yards of the ranch houses here. But a swing gate hung on a 1960s slab needs a hinge post that’s plumb and a footing that won’t creep. We’ve pulled more than one leaning post out of a Temple City driveway and found a footing that was never deep enough for the gate that got bolted to it. When we install a swing gate, we set the post depth based on the gate’s actual weight and the soil conditions in your yard, not on a guess. Expect $3,900 to $9,800 for a typical double swing gate installation with automation.
Sliding Gate
Sliding gates work well on Temple City lots where the driveway is tight to the house or where a swing gate would arc into landscaping or a walkway. The catch here is the track. Older Temple City sliding gates were often installed with undersized rack and pinion hardware, and after twenty years on a settling slab, the rack is worn uneven and the operator is fighting the gate every cycle. We install new sliding gates with properly sized track, a matched rack, and an operator that isn’t straining from day one. Sliding gate installation in Temple City generally runs $5,200 to $13,000.
Pedestrian Gate
A pedestrian gate beside the driveway gives you a way in and out without cycling the big gate every time. On Temple City properties where the driveway gate is automated, we recommend a separate pedestrian gate with its own keypad or lock. It saves wear on the operator and it’s more convenient for daily foot traffic. Pedestrian gates here typically run $1,800 to $4,500 installed, depending on material and hardware.
For a deeper look at all gate types and what goes into each installation, see our Gate Installation page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Temple City
We’re trained and equipped on nine gate-automation brands, including Linear, Viking, DoorKing, and Ghost Controls. That breadth matters in Temple City, because the gates here aren’t uniform. Some homeowners have a Viking swing operator from the 1990s that’s still limping along. Others have a DoorKing slide operator that was installed last decade. A few have Ghost Controls systems they bought and partly installed themselves. When we quote a new gate installation, we match the operator to the gate, the driveway, and how often the gate cycles. We keep common parts and handle Gate Parts & Welding in Temple City on our trucks, which means fewer return trips and a faster install for Temple City customers.
Common Gate Installation Problems We See in Temple City Homes
- Shallow post footings on mid-century slabs. The original concrete on a 1950s Temple City driveway wasn’t engineered for a 300-pound gate swinging off a 6-foot post. Within a few years the post leans, the gate binds, and the operator burns itself out fighting the sag. The fix is a properly sized footing, and that’s a job we do before we hang the new gate.
- Obsolete control boards in 1990s operators. Temple City has a large number of Viking and DoorKing operators installed in the 1990s and early 2000s. Their control boards weren’t built for San Gabriel Valley hard water, and mineral deposits on limit switches and relays eventually leave a gate stuck mid-travel. We can replace the board or, more often, retire the whole operator for something with modern UL 325 entrapment protection.
- Severed buried loop detectors. Many Temple City driveway gates from the late 1990s use loop detectors buried in the concrete. When a 60-year-old slab cracks and settles, the loop wire snaps, and the gate starts opening and closing on its own. Homeowners think the opener is failing. It’s the loop. We can replace it or convert the system to a wireless sensor.
- Blistered paint and powder coat on iron gates. The San Gabriel Valley’s UV index is brutal on iron. Gates in Temple City take direct afternoon sun, and paint that would last a decade at the coast blisters and peels here in four or five years. We prep and coat for this climate, not for a showroom.
Pricing for Gate Installation in Temple City, CA
Here are the honest numbers for Temple City gate work. A basic single swing driveway gate with manual hardware starts around $3,900. A double swing gate with automation runs $6,500 to $9,800 on average. Sliding gates cost more because of the track and rack hardware, typically $5,200 to $13,000 installed. Pedestrian gates run $1,800 to $4,500. Post footing reinforcement, when needed, adds $600 to $1,800 depending on depth and soil. Every quote is settled before we touch a tool, and the price we agree on is the price on the invoice. Call (747) 277-8422 for a free estimate, and ask about our $50 Off Any Repair Over $250 and our permanent 5% Senior and Veteran discount.
We Also Serve Cities Near Temple City
Our crews work across the San Gabriel Valley. Beyond Temple City, we install gates in Gate Installation in Temple City neighboring communities including San Gabriel, Rosemead, South El Monte, and San Marino. If you’re just across the border on Rosemead Boulevard or Las Tunas Drive, the crew that knows Temple City’s slabs knows yours too.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Temple City
You can keep the loop if it’s still intact, and we’ll test it before we quote the operator swap. But on Temple City’s older slabs, we often find the loop wire has already been severed by settling concrete, and in that case replacing it means cutting a new channel in the driveway. The alternative is a wireless sensor retrofit, which costs less than cutting concrete and works reliably on this housing stock. Either way, we’ll show you the test results and give you the choice before we do the work. Call (747) 277-8422 for an exact quote.
Temple City sits at the same elevation as Pasadena, but your gate’s exposure and finish are what make the difference. The San Gabriel Valley’s UV index is punishing on iron, and gates that face west or southwest take direct afternoon sun with no shade in Temple City’s open front yards. If your gate was powder coated more than six or seven years ago, the coating has likely broken down from UV exposure and hard groundwater minerals have started creeping under the finish at the welds. Pasadena’s tree canopy shades more gates. Yours is out in the open. We prep and coat for this specific climate when we install or refinish a gate in Temple City. Call (747) 277-8422 and we’ll look at what’s on your gate.
Sometimes, but on many 1990s Viking boards the control logic doesn’t have a dedicated photocell input that meets current UL 325 entrapment standards. We can check your specific board and tell you honestly. If the board can’t support a modern photocell properly, retrofitting means adding an external safety relay, which works but adds cost to a machine that’s already twenty-five years old. At that point, replacing the operator with a new LiftMaster or Viking unit with integrated entrapment protection is usually the cheaper play over another five years. We’ll give you both options and the numbers. Estimates are free at (747) 277-8422.
Almost certainly yes. The slabs under Temple City’s 1950s and 1960s ranch homes were poured at residential depth with no expectation that a heavy iron gate would ever hang off them. If the concrete around your existing post is cracked, the footing beneath it is likely too shallow or has been undermined by settlement. Hanging a heavier gate on that post guarantees a lean within a few years and a burned-out operator fighting the sag. We can saw-cut the affected area, pour a properly sized footing, and set the new post before we install the gate. It adds $600 to $1,800 to the job, and it’s the difference between a gate that lasts forty years and one that’s binding again in three. Call (747) 277-8422 for a free assessment.
You can reuse the rack only if the teeth are still in good shape and the rack is straight. On 1990s Temple City sliding gate installs, that’s rare. The racks used then were often undersized for the gate’s weight, and after twenty-plus years of cycling on a settling slab, the teeth are polished unevenly and the rack has bowed. Mating a new operator to a worn rack just burns the new motor’s gearbox out early. We’ll inspect the rack and measure the wear, and if it’s marginal we’ll tell you that replacing it now costs less than replacing the operator again in three years. Call (747) 277-8422 and we’ll give you a straight answer.
Call Ironworks Gate Co. for Gate Installation in Temple City
If your Temple City gate is leaning, binding, or running on a control board that’s older than your grandchildren, ask about our Gate Access Control in Temple City or call us at (747) 277-8422. We’ll send a background-checked technician to your home, measure your driveway and your existing gate, and give you a written price before any work begins. No pressure, no surprises on the bill, and every job covered by our 90-Day Done Right Promise in writing. Victor Salinas and the Ironworks Gate Co. crew have been doing this work for over 42 years, and we plan to be doing it in Temple City for another forty.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Temple City and the San Gabriel Valley with gate installation, repair, and automation.