Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Altadena, CA
Gate repair in Altadena typically runs between $180 and $340 for common fixes like hinge realignment, sag correction, or a new gate wheel assembly, while full gate replacement and automation run into the thousands depending on driveway width and material. Most repair calls in this part of the San Gabriel foothills are answered the same day or within 24 hours. If your gate groans, drags, or quit responding to the remote, our Gate Access Control - Altadena team is available: call (747) 277-8422 and a person will pick up, day or night. We dispatch local crews who know the difference between a Pasadena gate problem and one shaped by Altadena’s wind and terrain.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Altadena Homeowners Choose Ironworks Gate Co.
Altadena homeowners call us after someone else did the job halfway. That’s not an insult to the neighborhood; it’s the reality of a trade where a handyman with a welder and a YouTube video can make a gate worse for less money up front. We’ve been a dedicated gate company for over 42 years, founded in 1984, and we service nine gate-automation brands, including Linear, Viking, and DoorKing, so the first visit usually ends with the gate working again. Our crews have been through every corner of Altadena, from the winding driveway approaches near La Vina and The Meadows to the older bungalows off Lake Avenue and the rebuild sites throughout the Eaton Fire burn area. Technicians show up background-checked and in uniform, with enough parts on the truck to finish most jobs in one stop. Every quote is settled before a single bolt turns. If it isn’t right when we leave, our written 90-Day Done Right Promise says we come back and make it right, no argument and no paperwork chase.
Gate Repair Services We Offer in Altadena
Gate Repair
We straighten steel and aluminum frames, re-hang sagging leaves, replace broken hinges, weld cracked posts, and reset gates knocked off their track or stops. Altadena’s Santa Ana gusts are hard on hardware, and we see the same band of failures up and down the foothill streets every year. Learn more about our Gate Repair in Altadena.
Gate Installation
New gate construction covers everything from a single driveway swing gate to a full estate entry with steel or aluminum, sized and set for the slope and setback of your property. Because Altadena is unincorporated LA County, site measurements and permit timing get handled a little differently, and we walk you through that before any order is placed. Learn more about our Gate Installation in Altadena.
Gate Motor & Opener
We rebuild and replace motors, arms, receivers, and safety photo eyes on nine opener brands including LiftMaster, FAAC, BFT, Ghost Controls, Viking, and Mighty Mule. If your gate opens fine but the remote does nothing, or the motor grinds and quits, we’ll diagnose it on the spot. Learn more about our Gate Motor & Opener in Altadena.
Gate Access Control
Keypads, intercoms, telephone entry boxes, and vehicle loop detectors keep your driveway working the way it should for family, deliveries, and guests. We service and install both stand-alone systems and tie-ins with existing openers. Most keypad and loop failures can be fixed in one visit.
Gate Parts & Welding
Cracked posts, broken pickets, failed caster wheels, rusted hinges, and missing finials are all repairable. Through our Gate Parts & Welding in Altadena, our welders work with steel, wrought iron, and aluminum, and can match the look of your existing gate rather than bolting on something that looks like it came from another house. We also fabricate replacement panels and sections when a full gate replacement would be overkill.
Neighborhoods We Serve in Altadena
Our Altadena crews run the full length of Lake Avenue and Fair Oaks Avenue, up into the foothill streets where driveways get steeper and gates work harder. Typical response time for repair calls in Altadena is same-day or next morning, depending on your location and what’s actually wrong with the gate.
- La Vina and The Meadows
- Altadena Country Club area
- North Lake and the 91001 corridor
- Janes Village and the 91003 neighborhoods
- Eaton Canyon and Rubio Canyon approaches
Why Altadena’s Climate & Housing Affect Gate Repair
Altadena sits directly at the base of the San Gabriel Mountains, which means the downslope Santa Ana winds hit harder here than a mile south in Pasadena. Those gusts warp wooden gate panels, bend hinge plates, and knock automatic swing gates off their stops, a failure pattern we see more often in 91001 and 91003 than anywhere else we work in the San Gabriel Valley. The pre-fire housing stock was heavy with 1920s-to-1950s Craftsman and Spanish Colonial Revival homes, many of them holding long driveway approaches with older wood or wrought-iron swing gates. Add the Very High Fire Hazard Severity Zone designation that covers much of the foothills, and more homeowners now ask for non-combustible steel or aluminum replacements instead of wood. The January 2025 Eaton Fire rewrote large parts of this community, and gate work across Altadena now happens in two modes at once: preserving and repairing older gates on surviving homes, and building new driveway entries for homes being rebuilt from the slab up. We’ve worked both sides of that line in recent months and we read the job differently depending on which side you’re on.
There’s also a jurisdictional detail most folks don’t find out until it costs them time. Altadena has no city government, so any gate automation permit flows through LA County Building and Safety, whose permit office is in Alhambra, not up the hill from your house. County setback rules and inspection scheduling apply, and the timeline can stretch weeks longer than a Pasadena or San Marino project. First-time contractors get caught by this all the time. We don’t, because we handle county submittals for Altadena jobs as a matter of course, and we’ll tell you the real schedule before anyone starts digging.
Pricing for Gate Repair in Altadena
Every Altadena gate job gets a written price before we touch the gate, so there’s never a surprise line item at the end. These are straight-line ranges for the most common repair work we handle in this area:
- Gate sag correction, hinge adjustment, or latch realignment: $180-$320
- Gate wheel or caster replacement (single gate): $140-$260
- Welded crack repair on a steel or iron gate frame: $220-$480
- Gate opener motor replacement (parts and labor): $550-$1,450 depending on brand and horsepower
- Keypad or intercom replacement: $260-$700
- Full gate replacement with installation: $2,200-$9,500 depending on width, material, and automation
Those numbers are for typical residential gates in Altadena. Long estate driveways, tall privacy gates, custom welding, and county permit work change the math, and we’ll spell that out on your estimate. We also run standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (747) 277-8422 for a free estimate, and the price we quote is the price you’ll pay.
Service Area - Cities Near Altadena
Our Altadena crews also cover the neighboring foothill and valley communities, so if you’re one town over, the same team can usually reach you. We serve homeowners in Pasadena, San Marino, San Gabriel, and Alhambra with the same written guarantee and brand-trained technicians.
Serving Altadena, CA - Our Local Coverage Area
We’re based in the Altadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Altadena
Most gate repairs in Altadena cost between $180 and $340, which covers common fixes like a sagging gate, a reversed or stuck wheel, a bent hinge, or a latch that won’t catch. Heavier work like welding a cracked post, replacing an opener motor, or converting a manual gate to automated falls into the $550 to $1,450 range, and a full gate replacement starts around $2,200. Every job gets a written price before we begin, so the number we quote is the number you’ll owe. Call (747) 277-8422 for a free estimate, and if you already have a written quote from another company, bring it in and we’ll give you a free second opinion.
Yes, and we’ve done a number of these since the fire. We measure the driveway opening on the current lot conditions, work with you on material selection (most rebuilds in Altadena are going with steel or aluminum for fire-code reasons), and handle the LA County permit path that applies because Altadena has no city hall. Installation timelines depend on county permitting and material availability, but we’ll give you a written schedule before you commit. Call (747) 277-8422 and we’ll send someone to measure without charge.
Altadena’s position against the San Gabriel foothills channels Santa Ana winds downslope with real force, and swing gates take the brunt of it. The problem is usually under-built hinges for the gate’s weight or a mounting post that was never set deep enough for this soil composition. We re-hang the gate, upgrade the hinge hardware, and add or adjust wind-stops so the gate stops slamming out of travel. Most of these fixes take one visit, and our 90-Day Done Right Promise applies in writing.
Most automated driveway gate projects in Altadena need an electrical permit through LA County Building and Safety, because Altadena is unincorporated and there’s no city building department. County review and inspection scheduling add time to the project. We prepare and submit the paperwork as part of the job, and we’ll tell you the honest timeline before anyone starts. Call (747) 277-8422 and we’ll explain exactly what your property needs, based on where your gate sits and what’s already there.
In most cases, yes. Our technicians are trained on nine gate-automation brands, including Linear, Viking, Ghost Controls, and DoorKing, plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. If your opener is older or from a brand that’s been discontinued, we’ll tell you on the phone whether we can repair it or whether it makes more sense to replace the motor and keep your existing gate. Call (747) 277-8422 and describe what’s happening, and we’ll let you know what we’re looking at before we even schedule the truck.
Call Ironworks Gate Co. for Gate Repair in Altadena
If your gate is dragging on the concrete, grinding when it opens, or sitting still when you push the remote, call (747) 277-8422 now. A live person answers the phone 24 hours a day, 7 days a week, even during a windstorm or on a Saturday morning. We’ll give you a straight price for the repair, and we’ll put it in writing before we start. Done right, and backed in writing. That’s the whole deal.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Altadena and the San Gabriel foothills with dedicated gate repair, installation, and automation work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Altadena Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad