Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Altadena
Gate parts and welding in Altadena usually comes down to one of three calls we get: a hinge post that’s rotted at the base, a builder-grade operator that quit after the first Santa Ana wind, or a homeowner who finally wants their 1950s wrought-iron gate automated without tearing out the whole driveway. Most of these jobs take a single visit. We stock the common hinge sizes, rollers, and latch hardware for Altadena’s older gates on our trucks, so the fix usually happens that day. If you’re dealing with a sagging gate, a snapped weld, or a post that’s leaning after the rains, call (747) 277-8422 and a live person answers. We’ll get a technician to your Altadena driveway, usually same-day for hardware repairs.
Since the Eaton Fire, our Gate Parts & Welding crews have worked through a wave of rebuild-related gate problems in Altadena: fast-track construction, county permit confusion, and operators failing months after installation. We know the difference between a gate that needs a new hinge and a post that was never set right. We also know which LA County forms you’ll need before we weld anything structural.
Why Ironworks Gate Co. Is Altadena’s Preferred Gate Parts & Welding Company
We’ve been at this since 1984. Victor Salinas founded Ironworks Gate Co. on a simple rule: do the job like it’s going on your own mother’s driveway. That means background-checked, uniformed technicians. It means a written 90-Day Done Right Promise on every job, no paperwork, no arguing. And it means a live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service.
Altadena homeowners don’t have time for contractors who don’t understand how LA County works. When a Pasadena contractor tells you the city will handle the permit, that’s a red flag. Altadena is unincorporated, so gate automation permits run through LA County Building and Safety in Alhambra. We’ve pulled enough of them to know the county-specific setback rules and inspection scheduling. That one detail saves Altadena homeowners weeks of delay and a lot of frustration.
Our reviews from Altadena customers consistently mention the same things: the tech showed up on time, the price was settled before work started, and the gate closes like it did when the house was built. We don’t chase the lowest bid. We chase the last call you’ll ever need to make about that gate.
Our Gate Parts & Welding Services in Altadena
Hinge Replacement
Hinge replacement is the most common welding job we do in Altadena, especially on the older Craftsman bungalows and Spanish Colonial homes that line the streets north of Altadena Drive. A hinge wears, the gate drops, and the latch stops catching. We remove the old hardware, weld in a new barrel hinge or strap hinge sized to the gate’s weight, and re-hang it so the gate swings level. Most hinge replacements in Altadena run $180 to $420 depending on the gate’s size and whether the post needs reinforcement at the same time. We quote the full price before any work starts.
Post Replacement
Altadena’s decomposed granite soil shifts. A hinge post that was set without a deep enough footing or proper shims will lean within a few seasons, and no amount of hinge adjustment fixes a moving post. We cut out the old post, dig and pour a proper footing, set a new steel or powder-coated post, and weld the gate back to it. On rebuilds off Lake Avenue, we’ve seen posts set by fast-track contractors that failed in under a year. Post replacement in Altadena typically runs $500 to $1,200 depending on the post size, footing depth, and whether the gate needs to be re-hung the same day.
Rail Repair
Older wrought-iron and steel tube gates in Altadena rust where the lower rail meets the pickets, especially on properties with irrigation overspray or heavy mulch against the gate. We cut out the rotted section and weld in a new section of matching tube, then grind and paint the repair so it disappears. Gate rail repair in Altadena generally runs $200 to $550 per rail section. If the rust has spread through multiple pickets, it’s usually cheaper to replace the whole panel than to chase rust welds for another decade.
Custom Welding
Need a custom bracket? A gate extension to close a gap after a fence repair? A canted post brace matching a 1930s design? Our welders fabricate on-site. Victor Salinas came up as a welder before he built this company, and the standard has not changed: the 400th weld gets the same care as the first. Custom welding in Altadena runs $95 to $150 per hour plus materials, and we always quote the job as a flat number before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Altadena
Whatever opener is on your Altadena driveway, our techs are trained and equipped on it. We regularly service Linear, Viking, Ghost Controls, and DoorKing systems, and we keep their common control boards, remotes, and safety-edge components stocked for Altadena service calls. That means we don’t have to order a part and come back next week. Most parts and welding jobs are handled in one visit.
Common Gate Parts & Welding Problems We See in Altadena Homes
- Builder-grade operators failing after Santa Ana winds. Fast-track Eaton Fire rebuilds have pushed a lot of budget operators onto Altadena driveways. When the downslope gusts hit, the gates twist, the operators fight the wind, and the gearboxes strip. We replace the operator and, just as often, rebuild the hinge post it was never meant to carry.
- Rotted post footings in decomposed granite soil. Altadena sits on granite-derived soil that drains fast but shifts. Posts set shallow or without proper shimming lean within months. The fix is a new footing and a properly set post, not a bigger hinge.
- Manual gates with no conduit run for automation. Many 1920s to 1950s Altadena homes have beautiful old swing gates that were never wired for automation. Adding an opener means running conduit from the house to the gate. LA County setback rules sometimes require trenching at specific depths or routing, which surprises homeowners who’ve never dealt with county permits.
- Wind-warped wooden gate panels. The Santa Ana gusts don’t hit flatland Pasadena the way they hit Altadena’s foothill streets. A wooden panel twists, the latch misses, and the homeowner thinks the hinges are bad. Sometimes they are. Sometimes the panel itself needs to be rebuilt in steel or aluminum.
Pricing for Gate Parts & Welding in Altadena, CA
Here’s what Altadena homeowners can expect:
- Hinge replacement: $180-$420
- Post replacement (with new footing): $500-$1,200
- Rail repair or sectioning: $200-$550 per section
- Custom welding and fabrication: $95-$150 per hour plus materials, quoted flat
- Latch and lock replacement: $90-$250
- Gate roller replacement (slide gates): $150-$380 per pair
Every price is quoted and agreed before any work starts. No surprises on the bill. And every completed job carries the 90-Day Done Right Promise in writing. We also offer a free second opinion on any written estimate, plus $50 off any repair over $250. Seniors and veterans always get 5% off.
We Also Serve Cities Near Altadena
Serving Altadena keeps us busy, but our crews also work regularly in Pasadena, San Marino, San Gabriel, and Alhambra. If your gate is in one of those neighborhoods, the same team, the same trucks, and the same 90-Day Done Right Promise apply.
Serving Altadena, CA - Our Local Coverage Area
We’re based in the Altadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Altadena
No, a straight like-for-like hinge post replacement does not require a permit from LA County Building and Safety. We can usually complete that job the day we visit. But if you’re automating the gate, adding a slide gate operator, or changing the gate’s footprint or setbacks, that does go through LA County Building and Safety in Alhambra, and we handle that paperwork for you. Call (747) 277-8422 and we’ll tell you exactly which path your job falls under.
Because the operator was never matched to Altadena’s wind loads. The Santa Anas funnel down the San Gabriel foothills and hit Altadena harder than Pasadena a mile south. A budget operator with a plastic gearbox fights that wind, strips, and dies. We see this constantly on fast-track rebuilds. The fix is often a commercial-grade opener with a metal gear train, plus checking that the hinge post was set deep enough to carry the load. Call (747) 277-8422 for an honest assessment.
In most cases, yes. A well-built 1950s wrought-iron gate in Altadena is often stronger than what’s being installed new today. We weld mounting plates onto the existing frame, add the operator, run conduit and safety photocells, and the gate stays exactly where it’s been for seventy years. The challenge with older Altadena lots is usually the power run and conduit, not the gate itself. We’ll trench through the landscaping carefully and pull the LA County permits for you.
A sagging gate means the latch side sits lower than the hinge side. If the hinges are worn, we replace the hinges and the gate levels out. If the post itself is leaning, the whole assembly has shifted, and no hinge will fix that. On a rebuild off Lake Avenue, we replaced a warped hinge post on a Spanish Colonial swing gate that had sagged two inches at the latch. The real failure was a rotted post footing. The post was moving. We welded a new post, added a FAAC operator, and the gate has stayed level since. Call (747) 277-8422 and we’ll diagnose which problem you have.
LA County enforces setback requirements for slide gate operators that are different from Pasadena’s, because Altadena has no city government and all permits run through LA County Building and Safety in Alhambra. In practice, that means your slide gate may need to set back further from the street than you’d think, and the operator’s conduit placement gets inspected. We’ve pulled these county permits, we know the setbacks, and we schedule inspections so the project doesn’t stall. Call (747) 277-8422 and we’ll give you a straight answer on your specific lot.
Contact Ironworks Gate Co. for Gate Parts & Welding in Altadena
Whether it’s a hinge that gave out on a 1930s Craftsman off Mariposa, a post the Eaton Fire rebuild contractor set wrong, or a gate you want automated before the next Santa Ana, we can help. A live person answers at (747) 277-8422 day or night. We’ll schedule your Altadena visit, quote the full price before anything is welded, and back the work with the 90-Day Done Right Promise in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Altadena since the company’s founding.