Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Temple City, CA
A gate that won’t open is more than an inconvenience in Temple City. It blocks the driveway, keeps the car trapped, and leaves the property exposed. We fix that fast. Ironworks Gate Co. sends background-checked, uniformed technicians to homes throughout the 91780 zip code, and a live person answers our phone 24 hours a day at (747) 277-8422. Most gate repairs here are completed in a single visit, with the price settled before we turn a single bolt.
Walk down any Temple City street between Las Tunas Drive and Live Oak Avenue and you’ll notice it: ornamental iron gates everywhere. This city has one of the highest concentrations of custom driveway gates in the San Gabriel Valley. The neighborhood looks different because of it. And a lot of those gates, installed in the 1990s and early 2000s, are now reaching the end of their mechanical life all at once. That’s the work we do every day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Temple City Homeowners Choose Ironworks Gate Co.
The homes south of Las Tunas and the streets around Temple City Park have something in common: gates that were retrofitted onto 1950s and 1960s ranch houses. Those weren’t factory installations. They were custom jobs, welded and wired by different contractors at different times, with different hardware. Fixing them properly requires someone who has seen the full range of what can go wrong. We’ve been doing gate work since 1984, and we’ve learned that a Temple City gate from 1998 fails differently than one from 2006.
North of the 10 freeway, around the older residential pockets near Cloverly Avenue and the streets bordering San Gabriel, we see the same pattern repeated: good iron, tired openers. Homeowners call us after a general handyman has already been out twice. Victor Salinas leads our team with a simple approach: fix it right the first time, write it up honestly, and stand behind the work. Every job we complete is covered by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Read more about how we work on our home page.
Gate Repair Services We Offer in Temple City
Gate Repair
A sagging gate, a hinge pulling loose from the post, a bent track from years of daily cycling: these are the calls we make most often in Temple City. We weld, reinforce, and realign. We don’t patch around problems; we fix what caused them. Learn more about our Gate Repair in Temple City.
Gate Installation
Many Temple City homes still have no gate at all, or a gate that was never right for the driveway it sits on. We install new iron gates built for the specific clearances and post conditions on your property. Learn more about our Gate Installation in Temple City.
Gate Motor & Opener
When the gate stops moving but the remote still clicks, the opener is the usual suspect. We’re certified on nine major automation brands, including LiftMaster, Viking, and DoorKing. We diagnose, replace, and program on site. Learn more about our Gate Motor & Opener in Temple City.
Gate Access Control
Keypads, intercoms, vehicle sensors, and phone-based entry systems all fall under access control. Whether it’s a single keypad off Rosemead Boulevard or a full entry system for a gated property, we handle the wiring and the programming.
Gate Parts & Welding
Sometimes the gate itself is fine and it’s one component that failed. We stock and source hinges, rollers, brackets, chains, and more. Our welders can repair broken pickets and cracked frames in place, without removing the gate from the property.
Neighborhoods We Serve in Temple City
If you live in Temple City, we serve your street. Our techs are regularly dispatched around the city, typically arriving within 24 to 48 hours for non-emergency repairs.
- Temple City Park and the surrounding blocks
- The neighborhoods off Cloverly Avenue
- Streets north of Las Tunas Drive
- The older ranch-home clusters south of the 10
- Borders shared with San Gabriel and Rosemead
Why Temple City’s Climate & Housing Affect Gate Repair
Two local conditions shape nearly every gate problem we see in Temple City. First, the heat. The San Gabriel Valley gets triple-digit summer days and relentless UV exposure that coastal LA neighborhoods never experience. Iron gates here lose their powder coat faster. Paint blisters, bare steel rusts, and weld points weaken under the thermal expansion and contraction of the metal. A gate installed in Temple City in the 1990s has weathered something around a quarter century of cycles: heating up, cooling down, swelling, shrinking. Metal remembers that stress.
Second, the water. Temple City draws from the San Gabriel Basin, and the groundwater here is hard, carrying dissolved minerals that leave deposits on hinges, rollers, and opener components. We regularly clean mineral scale off gate hardware in this area, sometimes a quarter inch thick on rollers that cycle twice a day or more. Combine hard water with UV deterioration, and a gate that would last 30 years in a coastal climate might need major service here at 20. That’s what we’re seeing now, all across Temple City’s ranch-home neighborhoods. These are localized failure patterns, and we have spent years learning to address them properly.
One more Temple City-specific issue worth highlighting. Many automatic gates installed here in the late 1990s used loop-detector systems: wire loops buried in the concrete driveway, which sense the weight of a car and trigger the gate. The concrete on those 1960s-era driveways has cracked and settled over the decades, and the buried loops have broken along with them. When that happens, the gate starts opening and closing on its own, phantom cycles that look exactly like opener failure. Homeowners replace a perfectly good motor, and the problem persists. The fix is loop replacement or a wireless sensor retrofit, which we handle regularly.
Pricing for Gate Repair in Temple City
Here are our current price ranges for common repairs in the Temple City area. Every job is quoted and agreed before any work starts, with no surprises on the bill.
| Service | Typical Range |
|---|---|
| Hinge replacement or weld repair | $180 - $340 |
| Roller and track alignment | $150 - $300 |
| Opener motor replacement | $450 - $1,200 |
| Keypad or intercom replacement | $200 - $500 |
| Loop detector replacement or retrofit | $300 - $700 |
| Full gate realignment and tune-up | $250 - $500 |
We offer a $89 Seasonal Tune-Up and $50 off any repair over $250 for Temple City residents. Seniors and veterans always receive a 5% discount. Call (747) 277-8422 for an exact quote, and if a competitor has given you a written estimate, we’ll provide a free second opinion on it.
Service Area - Cities Near Temple City
Ironworks Gate Co. also serves the surrounding San Gabriel Valley. Learn more about our work in San Gabriel, Rosemead, South El Monte, and San Marino.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Temple City
Gate repair in Temple City typically costs between $150 and $500 for common fixes like hinge replacement, track alignment, and roller work, while opener motor replacement runs $450 to $1,200 depending on the brand and model. Every quote is fixed and agreed before any work begins. Call (747) 277-8422 for a specific price on your gate, with a free second opinion available on any written estimate.
For most repair calls, we typically arrive within 24 to 48 hours in the Temple City area. If your gate is stuck open or blocking your car inside the driveway, we treat that as an emergency. A live person answers our phone around the clock at (747) 277-8422, so call and tell us what’s happening, and we’ll get someone out as quickly as possible.
In Temple City, this is very often a severed loop-detector wire under a cracked or settled driveway slab, especially on homes built in the 1950s and 1960s. The opener might be working fine, but the broken loop sends false signals, causing phantom open and close cycles. We diagnose whether it’s the loop or the opener before any parts are replaced.
We’re trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whatever opener is on your Temple City driveway, we’re familiar with it and we carry or can quickly source the correct parts.
Yes, and that’s most of what we do. Many Temple City gates were installed decades ago by contractors no longer in business. We’ll work on any gate, regardless of who built it, and we don’t try to sell you a replacement if a repair will do the job. Our written 90-Day Done Right Promise applies to every repair we complete.
If you need a gate looked at in Temple City, call (747) 277-8422 for a free estimate. A live person answers, day or night, and a background-checked technician will arrive when we say they will.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Temple City and the San Gabriel Valley.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett